For people who climb for a living. 09 274 8090

At Height Tether Double Leg

At Height Tether Double Leg

At Height Tether Double Leg



Designed in collaboration with Eric Whipple, this unique @Height Double Tether has two 4mm legs which takes up much less volume on the carabiner bar when used in conjunction with the DMM Hitch Climber. Just like the original single-leg @Height tether, the rubber bumper helps prevent the Rope Wrench from going into "neutral". The Double Tether allows the climber to use it with the legs together or separated depending on the configuration. Made in the USA.

Minimum Qty

1 Items

Order Ships in

1 Bus Days


In Stock

Product Code: 118-12001002

All prices include GST
  • 6mm black cord wrapped in multi-layer heat shrink for medium stiffness
  • Unique stitching pattern keeps the legs as narrow as possible taking up less volume on the carabiner bar - combined width only 12mm
  • 300 mm length helps reduce binding when thinner diameter friction cords are used
  • Double eye at pulley end to suit DMM Hitch Climber pulleys
  • Best paired with an 800 mm long 10 mm e2e friction cord
  • Integrated rubber bumper to apply tension to the Rope Wrench on ascent
  • Rope Wrench not included
  • Made in the USA
Length 300 mm
Strength 24.5 kN
WLL 2.4 kN
Lifter Loop NO
Stiffness MEDIUM
Bottom Eye DOUBLE

Under $250  
Auckland $6.90
North Island $9.90
South Island $12.90
Orders Over $250 FREE*


Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.

*Free Shipping excludes ladders and overweight product.

NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.

Accurately tracking the life of a product is paramount for your safety

Due to the critical nature of gear stocked by Treetools, we cannot accept returns on safety equipment, so please choose carefully. Treetools cannot accept returns or exchanges on safety equipment because we need to ensure the gear you purchase is brand new, in a safe condition, and traceable directly back to manufacturers and suppliers. Please understand this equipment plays a critical role in your safety, potentially preserving your life when you climb or work aloft. Climbing and rigging equipment listed on these pages should only be used by suitably trained and qualified individuals.

What counts as work at height safety equipment?
  • Ascenders
  • Carabiners
  • Climbing Kits
  • Climbing Lines
  • Climbing spurs
  • Connectors
  • Descenders
  • Friction Cords
  • Friction Savers
  • Harnesses
  • Helmets
  • Lanyards
  • Pulleys
  • Rope Tools
  • Slings
  • Swivels

Please ensure you select compatible gear for your specific configuration. For example, the correct diameter rope for the hardware your are running. Safety products cannot be returned due to configuration incompatiability - do your research, or ask us if you are not sure.

You may also like

Copyright © Treetools New Zealand 2023. All rights reserved.