| Specification | |
|---|---|
| Length | 190 mm |
| Weight | 475 g |
| Suitable for impact? | NO |
| Working Line Ø | ≤13 mm |
| Top Strop Ø | ≤12 mm |
| Locking Sheave | NO |
| MBS | 30 kN |
| WLL | up to 70 kg |
ISC RP290 Rigging Wrench
$399.00
Quantity
The ISC RP290 Rigging Rope Wrench is a lowering device suitable for loads up to 70kg. The RP290 uses a bearing, applying friction to the lowering line when anchored at the top of a tree. The load is controllable from both ground level or aloft by the climber, which is helpful for smaller crews and on-the-job multi-tasking. When attached to the tree's base, the ISC Rigging Rope Wrench provides friction control in mechanical advantage configurations. Designed by Kevin Bingham and manufactured in Wales by ISC.
Minimum Qty
1 Items
Order Ships in
1 Bus Days
Availability
In Stock
- Set up in the canopy and control the descent of limbs from the ground or aloft
- Push-to-turn release mechanism
- Stainless steel spindle with bushed pulley sheave
- Rugged hot-forged aluminum side plates
- Perfect for small crews
- Black connecting 'bone' for easy identification
- Comes complete with carry case
- Made in Wales
PLEASE NOTE: Adequate training and judgment are needed to reduce the risks inherent in using this equipment. The purchaser's responsibility is to ensure they are competent in using this product. Treetools strongly advise that you do not use any height safety or arborist equipment without first undertaking appropriate training.
No responsibility will be accepted by Treetools for damage, injury or death resulting from incorrect assembly or modification. If in doubt, contact Treetools at richard@treetools.co.nz. Any person modifying this equipment assumes all risks and full responsibility for all damages or injury which may result from incorrect assembly or modification. This product must be modified by competent professionals only.
FREE SHIPPING on orders over $250. NO INTERNATIONAL SHIPPING.
| Under $250 | Shipping Fee |
|---|---|
| Auckland | $6.90 |
| North Island | $9.90 |
| South Island | $12.90 |
| Orders Over $250 | FREE* |
Orders with Rural Delivery addresses may take longer than stated to arrive.
SUPPLY CHAIN DISRUPTION
Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.
*Free Shipping excludes overweight products.
NO INTERNATIONAL SHIPPING - Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.
You may also like
-
SALENOTCH 13mm Rigging Block
$315.00
-
SALERock Exotica DownRigger
$689.00
-
SALEISC RP292 Rigging Wrench
$433.00
