| Specification | |
|---|---|
| Outer Diameter | 26 mm |
| Inner Diameter | 15 mm |
| Thickness | 12.5 mm |
| Weight | 9 g |
| Marking | PUL110-SPA |
DMM Pinto Spacer
$15.90
Quantity
12.5 mm aluminum spacer designed to work on the smaller DMM Pinto only. The spacer is designed to stop the side plates from coming together when excessive load is applied - only applicable when cordage is run through the top connection holes on the pulley - that is, you do not need a spacer if the pulley is attached by carabiner. The spacer fits loosely between the two side plates. The center hole on the spacer can take hardware and soft connections up to 14 mm in diameter.
Minimum Qty
1 Items
Order Ships in
1 Bus Days
Availability
In Stock
- Eliminates side plate flex when the DMM Pinto is used on cordage
- Milled to shape of pulley sheave - identified as PUL110-SPA
- Inner diameter of 14 mm can accommodate carabiner bar or ropes up to 14 mm
- Made in Wales
FREE SHIPPING on orders over $250. NO INTERNATIONAL SHIPPING.
| Under $250 | |
|---|---|
| Auckland | $6.90 |
| North Island | $9.90 |
| South Island | $12.90 |
| Orders Over $250 | FREE* |
Orders with Rural Delivery addresses may take longer than stated to arrive.
SUPPLY CHAIN DISRUPTION
Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.
*Free Shipping excludes ladders and overweight product.
NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.
You may also like
-
SALEDMM Pinto NATO
$94.50
-
SALEDMM Pinto Rig Spacer
$16.50
