For people who climb for a living. 09 274 8090

DMM Pinto Rig Spacer

DMM Pinto Rig Spacer

DMM Pinto Rig Spacer



14mm wide aluminum spacer designed to work on the DMM Pinto Rig only (it is too wide to fit the smaller Pinto). The spacer is designed to stop the side plates from coming together when excessive load is applied - only applicable when cordage is run through the top connection holes on the pulley - that is, you do not need a spacer if the pulley is attached by carabiner. The spacer fits loosely between the two side plates. The center hole on the spacer can take hardware and soft connections up to 15 mm in diameter.

Minimum Qty

1 Items

Order Ships in

1 Bus Days


In Stock

Product Code: 116-08001001

All prices include GST
  • Eliminates side plate flex when the DMM Pinto Rig is used on cordage
  • Milled to shape of pulley sheave - identified as PUL120-SPA
  • Inner diameter of 14 mm can accommodate carabiner bar or ropes up to 14 mm
  • Made in Wales
Outer Diameter 26 mm
Inner Diameter 15 mm
Thickness 14.5 mm
Weight 11 g
Marking PUL120-SPA

Under $250  
Auckland $6.90
North Island $9.90
South Island $12.90
Orders Over $250 FREE*

Orders with Rural Delivery addresses may take longer than stated to arrive.


Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.

*Free Shipping excludes ladders and overweight product.

NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.

You may also like

Copyright © Treetools New Zealand 2024. All rights reserved.