For people who climb for a living. 09 274 8090

Clogger ArcMax III 360

Clogger ArcMax III 360

Clogger ArcMax III 360

$665.00

Quantity
Waist Size:

Clogger Arcmax Gen3 360° Calf Wrap Chainsaw Trousers combine chainsaw protection with arc-rated and fire-resistant construction for arborists working around electrical and fire hazards. Six-layer Arrestex FR chainsaw protection uses inherently fire-resistant materials with Vectran® cut-resistant fibres, providing waist-to-ankle protection with a full 360° calf wrap that meets Canadian Category A requirements. The StretchFR outer provides 120% four-way stretch, 60% greater tear strength, abrasion-resistant knee reinforcement and an 11 cal/cm² arc rating to ASTM F1959, while all components are fire-resistant. Harness-friendly zipped pockets, a FlexZone seat, reinforced seams and 50 mm FR reflective tape complete the design. Complies with NFPA 70E 130.7(11), ENA NENS 09-2014 and EN ISO 15025:2000 requirements.

Minimum Qty

1 Items

Order Ships in

1 Bus Days

Availability

In Stock

Product Code: 401-02015001

All prices include GST
  • Full 360 calf wrap complying with Canada's Category A coverage requirements
  • Gen3 StretchFR outer provides 120% four-way stretch for unrestricted movement and 60% greater tear strength
  • Certified by Bureau Veritas NZ Ltd to AS/NZS 4453.3:1997 for chainsaw protection exceeding 20 m/s
  • Complies with NFPA 70E 130.7(11) and ENA NENS 09-2014 requirements for arc protection
  • Outer fabric rated to 11 cal/cm² to ASTM F1959 for arc resistance and tested to EN ISO 15025:2000 for flame resistance
  • Fire-resistant outer fabric, chainsaw protection and lining
  • Arrestex FR chainsaw protection uses inherently fire-resistant materials that will not melt or burn, with lightweight, breathable and quick-drying construction
  • Chainsaw protection extends from waist to ankle with a full 360° calf wrap for additional lower-leg protection
  • 50 mm FR reflective tape around the lower leg meets the performance requirements of ANSI 107:2015 and AS/NZS 1906.4:2010 high-visibility standards
  • Elasticated waist improves comfort and fit
  • Openings in the bottom hems allow debris to be removed
  • Two zipped hip pockets and a zipped left thigh pocket provide easy access while wearing a harness
  • Lock-stitched seams with reinforced stress points
Please note: No PPE can provide 100% protection when using handheld chainsaws. Users must ensure the garment is suitable for the application and follow all manufacturer safety procedures and guidelines. Appropriate training is essential before operating a powered chainsaw.
Size Chart Waist (cm)
Inleg
X-Small 78 - 83 77.5 cm
Small 84 - 89 79 cm
Medium 90 - 95 80.5 cm
Large 96 - 101 81.5 cm
X-Large 102 - 107 82.5 cm
XX-Large 108 - 113 82.5 cm

Please note: When selecting the correct size of trouser the lower figure is based on the waist being un-stretched whereas the higher figure is based on the waist being fully stretched. Please allow for freedom of movement when selecting the correct trouser size. Trousers should always be worn with a belt or braces ensuring the trousers are worn correctly and not as drop crotch style.

FREE SHIPPING on orders over $250. NO INTERNATIONAL SHIPPING.
Under $250 Shipping Fee
Auckland $9.90
North Island $12.90
South Island $15.50
Orders Over $250 FREE*

Orders with Rural Delivery addresses may take longer than stated to arrive.

SUPPLY CHAIN DISRUPTION

Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.

*Free Shipping excludes overweight products.

NO INTERNATIONAL SHIPPING - Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.

You may also like

Copyright © Treetools New Zealand 2026. All rights reserved.

  • Payment Methods