Work Safe. On Rope. 09 274 8090

DMM Pinto Spacer

  • DMM Pinto Spacer



    12.5 mm aluminum spacer designed to work on the smaller DMM Pinto only. The spacer is designed to stop the side plates from coming together when excessive load is applied - only applicable when cordage is run through the top connection holes on the pulley - that is, you do not need a spacer if the pulley is attached by carabiner. The spacer fits loosely between the two side plates. The center hole on the spacer can take hardware and soft connections up to 14 mm in diameter.

    Minimum Qty

    1 Items

    Order Ships in

    1 Bus Days


    In Stock

    Product Code: 116-08001002

    All prices include GST
    All prices exclude GST
    • Eliminates side plate flex when the DMM Pinto is used on cordage
    • Milled to shape of pulley sheave - identified as PUL110-SPA
    • Inner diameter of 14 mm can accommodate carabiner bar or ropes up to 14 mm
    • Made in Wales
    Outer Diameter 26 mm
    Inner Diameter 15 mm
    Thickness 12.5 mm
    Weight 9 g
    Marking PUL110-SPA
    No media download found.
    Shipping Rates
    Auckland $6.90
    North Island $9.90
    South Island $12.90
    Orders Over $250 FREE

    Free Shipping excludes ladders and overweight product.

    NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
    Find out more about Treetools Shipping and Return Policy here.
    All parcels require signature on delivery unless requested otherwise.

    You may also like


    DMM Pinto PulleySALE

    DMM Pinto Rig PulleySALE

    DMM Pinto Rig SpacerSALE

Treetools New Zealand © . All Rights Reserved.