| Eye (Inner Ø) | |
|---|---|
| Tight Eye Ø | 20 mm |
| Large Eye Ø | 150 mm |
Whiptail Sewn Termination
$30.00
Quantity
Whiptail sewn terminations are common on eye-to-eye friction cords and rope work positioning lanyards. Sewn terminations offer superior strength retention and improve safety while allowing full use of the line eye-to-eye. Whiptail sewn terminations are ideally suited to friction cords, kernmantle ropes, as well as 'used' climbing lines, ranging 8 mm to 14 mm in diameter (custom 16 mm available on request), but all ropes can have a sewn termination. Allow 200 mm for each sewn termination. Stitched by Treetools right here in New Zealand.
Minimum Qty
1 Items
Order Ships in
1 Bus Days
Availability
In Stock
- CNC controlled for consistent results
- Specially developed Whiptail stitch patterns retain maximum strength but are as short as possible allowing full use of the cord eye-to-eye
- Sewn terminations are much stronger and safer than knots
- Complies with International Standards - download Whiptail EN Certificate of Conformity
- Suits lines 8 mm to 14 mm (custom 16 mm available on request)
- Custom eye sizes available on request
- Hardware (e.g. thimbles) can be sewn into the 'eye' to help reduce chafing and wear in adverse environments. Contact Treetools if you want hardware installed.
- Sewn terminations are suitable for 'new' and 'used' ropes
- Stitched in New Zealand
- Keep in mind that a Whiptail Sewn Termination is a variable process, requiring approximately 200 mm of cordage (depending on eye specification). For instance, if you purcahse 3 m of rope for a lanyard and apply sewn terminations at each end, the stitched product will be shorter by 400 mm (approx.). All cordage measurements are nominal values; precise measurements are impractical due to variations in rope construction, stitch length, cord diameter and measurement methods. It's important to factor in these length variations when calculating your rope requirements.
You may also like
-
SALEWhiptail Spliced Termination
$45.00
