Specification | |
---|---|
Barrel | Triple-Lock |
Strength | 45 kN |
Weight | 281 g |
Gate Opening | 25 mm |
Bar Ø | 12 mm |
Approved to | EN 362:2004/B ANSI Z359.1 |
The Klettersteig shape maximizes the carabiner's strength by placing the load close and parallel to the carabiner's spine. The Klettersteig shape takes the strength and volume increases of an Offset D and extends them even further to give a high volume, super-strong connector. In addition, the Klettersteig's wide gate opening makes it particularly suitable for clipping oversize items or allows ease of use in more everyday situations. Cold forged and fully heat-treated for very high strength. Zinc plated and passivated for corrosion resistance. A very robust carabiner - particularly suited for securing rigging anchor points. ANSI Z359.1(07) EN362:2004/B
1 Items
1 Bus Days
In Stock
Specification | |
---|---|
Barrel | Triple-Lock |
Strength | 45 kN |
Weight | 281 g |
Gate Opening | 25 mm |
Bar Ø | 12 mm |
Approved to | EN 362:2004/B ANSI Z359.1 |
Under $250 | |
---|---|
Auckland | $6.90 |
North Island | $9.90 |
South Island | $12.90 |
Orders Over $250 | FREE* |
Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.
NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.
Due to the critical nature of gear stocked by Treetools, we cannot accept returns on safety equipment, so please choose carefully. Treetools cannot accept returns or exchanges on safety equipment because we need to ensure the gear you purchase is brand new, in a safe condition, and traceable directly back to manufacturers and suppliers. Please understand this equipment plays a critical role in your safety, potentially preserving your life when you climb or work aloft. Climbing and rigging equipment listed on these pages should only be used by suitably trained and qualified individuals.
Please ensure you select compatible gear for your specific configuration. For example, the correct diameter rope for the hardware your are running. Safety products cannot be returned due to configuration incompatiability - do your research, or ask us if you are not sure.