Specification | |
---|---|
Length | 420 mm |
Weight | 280 g |
Teeth Per Inch | 5.5 tpi |
Impulse Hardened | YES |
Hard Chrome Plated | YES |
Non-Set Teeth | YES |
Blade Thickness | 1.8 mm |
Kerf | 1.8 mm |
Max. Cut | 105 mm |
Genuine replacement blade for the Silky Hayate range of pole saws. To replace the Hayate blade, use a wide flat screwdriver to remove the three screws securing the blade and sickle to the blade receiver ferrule. Remove the old blade by gently sliding it out of the blade receiver. Remember, the undercutting 'sickle' blade is a separate component. Insert your new blade and re-tighten the screws securely. Please be careful when handling the new blade. The Silky Hayate 373-42 replacement blade features rust-resistant, hard chrome-plated, taper-ground blade with an impulse-hardened non-set tooth design for greater cutting efficiency.
1 Items
1 Bus Days
In Stock
Specification | |
---|---|
Length | 420 mm |
Weight | 280 g |
Teeth Per Inch | 5.5 tpi |
Impulse Hardened | YES |
Hard Chrome Plated | YES |
Non-Set Teeth | YES |
Blade Thickness | 1.8 mm |
Kerf | 1.8 mm |
Max. Cut | 105 mm |
Under $250 | |
---|---|
Auckland | $6.90 |
North Island | $9.90 |
South Island | $12.90 |
Orders Over $250 | FREE* |
Orders with Rural Delivery addresses may take longer than stated to arrive.
Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.
NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.