|Bar Ø||12 mm|
Petzl Ring-S (Small) for Petzl Sequoia work positioning harnesses. Attach directly to the Petzl Sequoia bridge for improved lateral mobility and then connect your climbing system directly to the ring. The bridge can easily be removed on the Petzl Sequoia harness - simply unscrew the gated rings (use a 25mm male Torx driver for pre-2014 harnesses and a 3mm HEX on the later models), slide out the plastic spacer and follow with the bridge eye. Slide the Ring-S onto the bridge and replace in reverse order - don't forget to add a drop of Loctite to the Torx thread for added security - the HEX model has a sealed O-ring so no need for Loctite
1 Bus Days
Product Code: 107-06002001
|Bar Ø||12 mm|
|Orders Over $250||FREE*|
Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.
NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.
Due to the critical nature of gear stocked by Treetools, we cannot accept returns on safety equipment, so please choose carefully. Treetools cannot accept returns or exchanges on safety equipment because we need to ensure the gear you purchase is brand new, in a safe condition, and traceable directly back to manufacturers and suppliers. Please understand this equipment plays a critical role in your safety, potentially preserving your life when you climb or work aloft. Climbing and rigging equipment listed on these pages should only be used by suitably trained and qualified individuals.
Please ensure you select compatible gear for your specific configuration. For example, the correct diameter rope for the hardware your are running. Safety products cannot be returned due to configuration incompatiability - do your research, or ask us if you are not sure.