| Specification | |
|---|---|
| Height | 224 mm |
| Width | 163 mm |
| Weight | 4.7 kg |
| Drum | 75 mm |
| WLL | 814 kg |
| Max Rope Ø | 12 mm |
| Strap | 9 m |
| Material | Aluminum |
FTC Micro-Cyclindre
$749.90
Quantity
The French Touch Concept Micro-Cylindre is a lightweight friction device used in tree care to hold and lower loads during felling and branch or log removal. But it’s lighter and more compact than other bollards on the market. Made entirely of aluminium, the FTC Micro-Cylindre won’t heat up and won’t burn your ropes. The upper ring enables pre-tensioning of the line. Two fairleads at the end of the cylinder prevent losing wraps and overlapping of the rigging line. The symmetry of the device allows left or right location of the ground crew. The FTC Micro-Cylindre comes complete with hard plastic box for easy transport and storage. Made in France.
Minimum Qty
1 Items
Order Ships in
1 Bus Days
Availability
In Stock
- Made entirely of rust-proof aluminum - won’t heat up and won’t burn your ropes
- 7000 daN, 9 m ratchet strap for trees up to 2m in diameter with MBS 6000 daN ratchet tensioner
- Tree-protection rubber feet to prevent the gouging and disfiguration of the tree
- Designed to accommodate rigging lines up to 12mm
- Add the FTC Croch'ty (sold separately) for single operator bollard installation
- Made in France by FTC
The NZ Arb BPG (Best Practice Guideline) states that the SWL (should be) 10% of the rope's average breaking strength, spliced strength or tensile strength unless otherwise stated by the manufacturer—this means you apply a safety factor of 10:1. Here's more reading if you want detailed information. One. Two.
PLEASE NOTE: Adequate training and judgment are needed to reduce the risks inherent in using this equipment. The purchaser's responsibility is to ensure they are competent in using this product. Treetools strongly advise that you do not use any height safety or arborist equipment without first undertaking appropriate training.
No responsibility will be accepted by Treetools for damage, injury or death resulting from incorrect assembly or modification. If in doubt, contact Treetools at richard@treetools.co.nz. Any person modifying this equipment assumes all risks and full responsibility for all damages or injury which may result from incorrect assembly or modification. This product must be modified by competent professionals only.
FREE SHIPPING on orders over $250. NO INTERNATIONAL SHIPPING.
| Under $250 | Shipping Fee |
|---|---|
| Auckland | $6.90 |
| North Island | $9.90 |
| South Island | $12.90 |
| Orders Over $250 | FREE* |
Orders with Rural Delivery addresses may take longer than stated to arrive.
SUPPLY CHAIN DISRUPTION
Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.
*Free Shipping excludes overweight products.
NO INTERNATIONAL SHIPPING - Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.
Accurately tracking the life of a product is paramount for your safety
At Treetools, we prioritize your safety above all else, so we cannot accept returns on safety equipment. This policy ensures that your gear is always brand new, safe, and traceable to our trusted manufacturers and suppliers. We understand the critical role this equipment plays in your safety, potentially even preserving your life during climbs or work aloft. Therefore, we urge you to choose carefully before making your purchase. Additionally, please note that suitably trained and qualified individuals should use the climbing and rigging equipment listed on our website. We want to reassure you of our unwavering commitment to safety. Thank you for your understanding and commitment to safety.
Non-Returnable Items: Due to safety and hygiene reasons, PPE gear that has been opened, used, or worn cannot be returned. This includes, but is not limited to, helmets, lanyards, harnesses, friction cords and ropes.
Return Conditions for Unused Items: Return Conditions for Unused Items: Unused items in their original, unopened packaging with intact seals can be returned within 30 days of purchase with proof of purchase.
Defective Products: Items with manufacturer defects can be returned or exchanged within the warranty period, regardless of packaging status. Please contact customer service for return authorization (RMA) and instructions.
Documentation Required: Proof of purchase and return authorization are required for all returns. Inspection Process: All returned items will undergo a rigorous inspection to ensure they meet return criteria. Items failing inspection will be returned to the customer.
Refund and Exchange Options: Refunds will be issued to the original payment method or as store credit. Exchanges are subject to availability.
Restocking Fee: 25% restocking fee for non-defective returns.
It is crucial that you select compatible gear for your specific configuration to ensure maximum safety. Failure to do so may result in severe consequences. We highly recommend that you choose the correct diameter rope that matches the hardware you are using. Please note that safety products cannot be returned due to configuration incompatibility. Therefore, we strongly advise you to conduct thorough research or ask us for clarification before making a purchase. Your safety is our top priority.
Replacement Parts
-
SALEFTC Croch'ty
$72.90
