The Rope Bridge Adjuster is only certified for use on the DMM Kinisi Max
You will need a crosshead screwdriver to remove the existing 'bone' and complete the installation of the Rope Adjuster
The Kinisi Bridge(s) might also need adjustment (talk with Treetools)
The kit includes M5 self locking nuts and bolts
The Rope Adjuster is ambidextrous (can be used on the left or right of the harness)
Rope friendly aluminium cleats running in formed channels

PLEASE NOTE: Adequate training and judgment are needed to reduce the risks inherent in using this equipment. The purchaser's responsibility is to ensure they are competent in using this product. Treetools strongly advise that you do not use any height safety or arborist equipment without first undertaking appropriate training.

No responsibility will be accepted by Treetools for damage, injury or death resulting from incorrect assembly or modification. If in doubt, contact Treetools at richard@treetools.co.nz. Any person modifying this equipment assumes all risks and full responsibility for all damages or injury which may result from incorrect assembly or modification. This product must be modified by competent professionals only.

Specification
Material	Aluminium
Cleats	Two
Hardware	YES

DMM Kinisi Max USER INSTRUCTIONS

FREE SHIPPING on orders over $250. NO INTERNATIONAL SHIPPING.

Under $250
Auckland	$6.90
North Island	$9.90
South Island	$12.90
Orders Over $250	FREE*

Orders with Rural Delivery addresses may take longer than stated to arrive.

SUPPLY CHAIN DISRUPTION

Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.

*Free Shipping excludes ladders and overweight product.

NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.