The rear restraint point on the back of the harness is easy to locate and doubles as a secure attachment point for a chainsaw lanyard
Double Frame Waist Buckle and Frame Leg Buckles and webbing rear restraint contribute to the lower weight
Webbing fold - lightweight and low profile
Removable Waist and Leg Pads
Two forward Ds provide suspension attachment points and can be positioned to suit your centre of gravity for comfort and manoeuvrability
The two side rings provide work positioning attachment points
Comes with one zero eye rope bridge and no anchor ring. Compatible with one or two rope bridges in a range of lengths and colours
5mm and 10mm Holes ideal for Stowaways, XSRE range or full-size carabiners; allows attachment of Tendon and Caiman. Two large Stowaways included.
Service Life 10-years

PLEASE NOTE: Adequate training and judgment are needed to reduce the risks inherent in using this equipment. The purchaser's responsibility is to ensure they are competent in using this product. Treetools strongly advise that you do not use any height safety or arborist equipment without first undertaking appropriate training.

No responsibility will be accepted by Treetools for damage, injury or death resulting from incorrect assembly or modification. If in doubt, contact Treetools at richard@treetools.co.nz. Any person modifying this equipment assumes all risks and full responsibility for all damages or injury which may result from incorrect assembly or modification. Any modifications to this product must be completed by competent professionals only.

Sizing (Waist)
Small	65 - 83 cm
Medium	75 - 102 cm
Large	88 - 123 cm
Load Capacity	150 kg

Specification
Certification	EN 358:2018 EN 813:2008
ASNZ 1891	PASS
Bridge	15 kN
Side D's	15 kN
Rear Attachment	15 kN
Anchor Ring	NO
Elastics	NO
Gear Loops	1 - 10 kg
Lifespan	10-years

DMM Kinisi Max USER INSTRUCTIONS

FREE SHIPPING on orders over $250. NO INTERNATIONAL SHIPPING.

Under $250	Shipping Fee
Auckland	$6.90
North Island	$9.90
South Island	$12.90
Orders Over $250	FREE*

Orders with Rural Delivery addresses may take longer than stated to arrive.

SUPPLY CHAIN DISRUPTION

Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.

*Free Shipping excludes overweight products.

NO INTERNATIONAL SHIPPING - Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.

Accurately tracking the life of a product is paramount for your safety

At Treetools, we prioritize your safety above all else, so we cannot accept returns on safety equipment. This policy ensures that your gear is always brand new, safe, and traceable to our trusted manufacturers and suppliers. We understand the critical role this equipment plays in your safety, potentially even preserving your life during climbs or work aloft. Therefore, we urge you to choose carefully before making your purchase. Additionally, please note that suitably trained and qualified individuals should use the climbing and rigging equipment listed on our website. We want to reassure you of our unwavering commitment to safety. Thank you for your understanding and commitment to safety.

Non-Returnable Items: Due to safety and hygiene reasons, PPE gear that has been opened, used, or worn cannot be returned. This includes, but is not limited to, helmets, lanyards, harnesses, friction cords and ropes.

Return Conditions for Unused Items: Return Conditions for Unused Items: Unused items in their original, unopened packaging with intact seals can be returned within 30 days of purchase with proof of purchase.

Defective Products: Items with manufacturer defects can be returned or exchanged within the warranty period, regardless of packaging status. Please contact customer service for return authorization (RMA) and instructions.

Documentation Required: Proof of purchase and return authorization are required for all returns. Inspection Process: All returned items will undergo a rigorous inspection to ensure they meet return criteria. Items failing inspection will be returned to the customer.

Refund and Exchange Options: Refunds will be issued to the original payment method or as store credit. Exchanges are subject to availability.

Restocking Fee: 25% restocking fee for non-defective returns.

It is crucial that you select compatible gear for your specific configuration to ensure maximum safety. Failure to do so may result in severe consequences. We highly recommend that you choose the correct diameter rope that matches the hardware you are using. Please note that safety products cannot be returned due to configuration incompatibility. Therefore, we strongly advise you to conduct thorough research or ask us for clarification before making a purchase. Your safety is our top priority.