Specification | |
---|---|
Hot Forged | YES |
Strength | 26 kN |
Length | 100 mm |
Width | 75 mm |
Gate Opening | 19 mm |
Bar Ø | Partial I-Beam |
Weight | 80 g |
Keylock Nose | YES |
No more Blue Bandits required! The 'horn' feature on the leading edge of the spine of the DMM Rhino significantly reduces the potential for carabiner cross loading with mechanical devices and pulleys. The full cross section of the top bar on the Rhino provides greater wear resistance when running rope in a belay situation. The horn makes identification by feel on the rear gear loop easier, and the clean nose design provides snag-free loading and unloading of ropes. The big burly top bar is contrasted by DMM's signature I-Beam construction on the non-rope bearing surfaces.
1 Items
1 Bus Days
In Stock
Specification | |
---|---|
Hot Forged | YES |
Strength | 26 kN |
Length | 100 mm |
Width | 75 mm |
Gate Opening | 19 mm |
Bar Ø | Partial I-Beam |
Weight | 80 g |
Keylock Nose | YES |
Under $250 | |
---|---|
Auckland | $6.90 |
North Island | $9.90 |
South Island | $12.90 |
Orders Over $250 | FREE* |
Orders with Rural Delivery addresses may take longer than stated to arrive.
Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.
NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.
At Treetools, we prioritize your safety above all else, so we cannot accept returns on safety equipment. This policy ensures that your gear is always brand new, safe, and traceable to our trusted manufacturers and suppliers. We understand the critical role this equipment plays in your safety, potentially even preserving your life during climbs or work aloft. Therefore, we urge you to choose carefully before making your purchase. Additionally, please note that suitably trained and qualified individuals should use the climbing and rigging equipment listed on our website. Thank you for your understanding and commitment to safety.
It is crucial that you select compatible gear for your specific configuration to ensure maximum safety. Failure to do so may result in severe consequences. We highly recommend that you choose the correct diameter rope that matches the hardware you are using. Please note that safety products cannot be returned due to configuration incompatibility. Therefore, we strongly advise you to conduct thorough research or ask us for clarification before making a purchase. Your safety is our top priority.