Work Safe. On Rope. 09 274 8090

DMM Pinto Rig Spacer

  •  
  • DMM Pinto Rig Spacer

    $16.50

    Quantity

    14mm wide aluminum spacer designed to work on the DMM Pinto Rig only (it is too wide to fit the smaller Pinto). The spacer is designed to stop the side plates from coming together when excessive load is applied - only applicable when cordage is run through the top connection holes on the pulley - that is, you do not need a spacer if the pulley is attached by carabiner. The spacer fits loosely between the two side plates. The center hole on the spacer can take hardware and soft connections up to 15 mm in diameter.

    Minimum Qty

    1 Items

    Order Ships in

    1 Bus Days

    Availability

    In Stock

    Product Code: 116-08001001

    All products include GST
    All products exclude GST
    • Eliminates side plate flex when the DMM Pinto Rig is used on cordage
    • Milled to shape of pulley sheave - identified as PUL120-SPA
    • Inner diameter of 14 mm can accommodate carabiner bar or ropes up to 14 mm
    • Made in Wales
    Specification
    Outer Diameter 26 mm
    Inner Diameter 15 mm
    Thickness 14.5 mm
    Weight 11 g
    Marking PUL120-SPA
    No media download found.
    Shipping Rates
    Auckland $6.90
    North Island $9.90
    South Island $12.90
    Orders Over $250 FREE

    Free Shipping excludes ladders and overweight product.

    NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
    Find out more about Treetools Shipping and Return Policy here.
    All parcels require signature on delivery unless requested otherwise.

    Customers also bought

    DMM Pinto PulleySALE

    DMM Pinto Rig PulleySALE

Treetools New Zealand © . All Rights Reserved.