Specification | |
---|---|
Length | 5.0 m |
Core | 8 mm stainless |
Sheath | 24-strand |
Outer Ø | 12 mm |
Adjuster | QSI AZ/NZ 1891.3 15 kN |
Snap | NO |
5.0 m for those extra big trees New Zealand made wire core flip line with an 8 mm stainless wire core and braided nylon sheath on the outside. Steel eye in one end and aluminium stopper at the other, hard chromed mechanical adjuster. Best used with a fully rated, Aspiring 'soft link' (so your partner can cut you out if you get into trouble) at the D-end on the harness. Needs two steel carabiners to complete the system. This wire core lanyard is an entry-level model but does the job if you are on a tight budget.
1 Items
1 Bus Days
In Stock
Specification | |
---|---|
Length | 5.0 m |
Core | 8 mm stainless |
Sheath | 24-strand |
Outer Ø | 12 mm |
Adjuster | QSI AZ/NZ 1891.3 15 kN |
Snap | NO |
Under $250 | |
---|---|
Auckland | $6.90 |
North Island | $9.90 |
South Island | $12.90 |
Orders Over $250 | FREE* |
Orders with Rural Delivery addresses may take longer than stated to arrive.
Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.
NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.
At Treetools, we prioritize your safety above all else, so we cannot accept returns on safety equipment. This policy ensures that your gear is always brand new, safe, and traceable to our trusted manufacturers and suppliers. We understand the critical role this equipment plays in your safety, potentially even preserving your life during climbs or work aloft. Therefore, we urge you to choose carefully before making your purchase. Additionally, please note that suitably trained and qualified individuals should use the climbing and rigging equipment listed on our website. Thank you for your understanding and commitment to safety.
It is crucial that you select compatible gear for your specific configuration to ensure maximum safety. Failure to do so may result in severe consequences. We highly recommend that you choose the correct diameter rope that matches the hardware you are using. Please note that safety products cannot be returned due to configuration incompatibility. Therefore, we strongly advise you to conduct thorough research or ask us for clarification before making a purchase. Your safety is our top priority.