For people who climb for a living. 09 274 8090

Knots reduce rope strength by half

Knots reduce rope strength by half

Richard Tregoweth - Friday, January 08, 2010

True? Well, almost. As a general rule the 50% figure can be applied but the real answer as to how much rope strength is lost is "it depends".

Have a look at this study conducted by Dave Richards, Technical Director with the Cordage Institute in the US. His team tested three different ropes types (and diameter) using eight different knot combinations common to the industry. The results show how each knot performed relative to the break strength of each particular rope - makes very interesting reading (and the graphs make comparisons easy).

One common theme throughout the testing was theimportance of tying the knot carefully, paying attention to detail. Obviously a knot tied in a sloppy manner will not perform as expected. Inappropriateknot tying is one of the reasons the industry is moving towards certified splices in climbing systems. According to Thilo Beeker, the International Representativeat the 2009 NZ TCC we are going to see more and more pressure being applied to have the number of knots in the climbing system reduced and all splicescertified.

Of course you could argue knot tying is part of the art of tree climbing (and rigging). If you can't tie a descent knot you shouldn't be climbing a treein the first place! That said, given that even the best tied, dressed and set knot will reduce the strength of the rope (by varying percentages) thereare plenty of situations where a splice would be more appropriate.

Tachyon tested by DM Standens in Auckland broke at the knot.

Copyright © Treetools New Zealand 2024. All rights reserved.