Genuine replacement Roll Lever for Spiderjack versions 1, 2 and 2.1. The Roll Lever is slightly longer than the original and includes fairleads for easier management of your climbing line tail.
1 Items
1 Bus Days
In Stock
To remove the existing lever, use a 2mm Hex key to release the grub screw on the faceplate of the Spiderjack.
Slide out the original lever and replace with the Roll Lever. Re-insert the grub screw and tighten to 26-5 - 35.4 inch pounds or 3.5 Nm using the 2mm Hex key provided a dab of Loctite would not go amiss.
Best used with the Dyneema (upgrade) Kit but can be used on all ART Spiderjack models.
Under $250 | |
---|---|
Auckland | $6.90 |
North Island | $9.90 |
South Island | $12.90 |
Orders Over $250 | FREE* |
Due to factors out of our control, Treetools is experiencing random shipping delays and supply issues that may result in some gear not being available either in-store and/or online. We apologise for any inconvenience this may cause.
NO INTERNATIONAL SHIPPING Treetools is a 'kiwi only' affair.
Find out more about Treetools Shipping and Return Policy here.
All parcels require a signature on delivery unless requested otherwise.